|
제품 상세 정보:
결제 및 배송 조건:
|
| 나사 직경: | 80mm | 나사 L/D 비율: | 25:1 |
|---|---|---|---|
| 맥스 생성물량: | 100 l | 클램핑 력: | 180 나트 |
| 다이 헤드 구성: | 싱글 / 더블 / 4인 | 형 플래튼 크기: | 800x600mm |
| 압출 용량: | 120-150kg/h(HDPE) | 제어 시스템: | 컬러 터치스크린을 갖춘 PLC |
| 강조하다: | Servo hydraulic extrusion blow molder,120-150 kg/h blow molding machine,Large drum extrusion blow molder |
||
Large drum lines have a peculiar cost structure: the machine is idle for a large share of every cycle because a 100 litre part needs a long cooling phase. A fixed displacement hydraulic pump keeps drawing power through that idle time, which is why energy can reach a quarter of the operating cost. The MP100FD uses a servo driven pump that follows the cycle. During cooling the pump almost stops; during clamp and carriage movement it delivers exactly the flow needed. On the same
담당자: Levi.Li
전화 번호: 86-13396686968
팩스: 86-574-81688011
