|
제품 상세 정보:
결제 및 배송 조건:
|
| 나사 직경: | 80mm | 나사 L/D 비율: | 25:1 |
|---|---|---|---|
| 맥스 생성물량: | 100 l | 클램핑 력: | 180 나트 |
| 다이 헤드 구성: | 싱글 / 더블 / 4인 | 형 플래튼 크기: | 800x600mm |
| 압출 용량: | 120-150kg/h(HDPE) | 제어 시스템: | 컬러 터치스크린을 갖춘 PLC |
| 강조하다: | 100L extrusion blow molding machine,180kN clamping force blow molder,extrusion blow molding machine 100L |
||
Large containers punish weak clamping. Above 50 litres internal pressure during blow-up pushes hard against the mould parting line, and any deflection shows up as flash that has to be trimmed by hand and a wall that is thinner on one side. The MP100FD answers that with 180 kN of clamping force spread over an 800 x 600 mm platen. The machine is built around an 80 mm nitrided screw running at 25:1 L/D, which gives 120 to 150 kg/h of HDPE throughput, enough to feed a 100 litre
담당자: Levi.Li
전화 번호: 86-13396686968
팩스: 86-574-81688011
